More Features

A common problem in condensate removal is the blockage of a drain line downstream from the pump. These blockages are typically organic growth of mold, mildew, algae, etc. These blockages can cause major problems with regular pumps — but not with ClearVue^TM. With many clogs, a little bit of pressure will provide the force needed to break the clog loose and clear it. ClearVue^TM is the only pump that can sense when a clog is there and work to clear it. In these instances, ClearVue^TM will first spin a bit faster, pump a bit harder, and increase the pressure in the drain line to attempt to clear the clog.

If the clog is particularly stubborn, ClearVue^TM continues increasing the pressure until the clog is cleared, or the high level alarm is activated. Once the high level alarm is activated, ClearVue^TM shuts down the cooling system but continues running to try and clear the clogged drain line. If the clog still remains, ClearVue^TM enters its self-cleaning mode to try to remove the clog. ClearVue^TM uses existing water in the lines to create a pulsing-action designed to clear the clog. This pulsing mode continues for several minutes to try and clear the blockage. If ClearVue^TM is successful in clearing the drain line clog, it restarts the cooling system and returns to normal functioning.

If ClearVue^TM is not able to clear a very stubborn clog, ClearVue^TM will remain in the high level alarm condition and keep the cooling unit in the off position. If the internal audio alarm is enabled, ClearVue^TM will beep its internal audible alarm until addressed by a service technician. ClearVue's default setting for the internal audible alarm is "off" but may be turned on at installation, if preferred.

ClearVue^TM is equipped with metal mounting tabs which allow the tank to be attached to a wall or equipment side panel. The screw-to-screw distance is 8". When mounting into drywall or concrete walls, the screws must have anchors which provide the necessary support in the wall material.

ClearVue^TM should be mounted level for optimum results, but the Floatless Sensor^TM in ClearVue^TM enables operation when mounted at an angle of up to 10º. ClearVue^TM also features sound dampening and anti-vibration soft rubber feet for floor installation. The ClearVue^TM top is reversible. It may be turned around to allow easy access to the pump outlet or power connection as may be required by the particular installation.

The ClearVue^TM high level alarm connections are made with standard 1/4" quick connect terminals located just above the power cord connection. Supplied with ClearVue^TM are two yellow wires with pre-crimped connectors. Single pole, double throw (SPDT) isolated relay contacts are provided for cooling system interruption and external alarm connection. These features are activated when the high level alarm is triggered. Connecting the common and run terminals in the call for cool wire from the thermostat enables ClearVue's capability to shut down the cooling system if there is a high level alarm. Connecting the common and alarm contacts to an external alarm enables ClearVue's capability to trigger an external alarm, such as DiversiTech's Universal Alarm (UA-1).

ClearVue^TM will periodically enter a routine cleaning cycle to reduce the potential for a drain line clog. This cycle pulses water in the drain line and agitates the water in the tank in order to prevent buildup of algae and other organic materials. If desired, a manual cleaning cycle can be started by pressing the Clean button. The cleaning cycle will begin automatically when there is sufficient water in the tank. The white "clean" indicator will flash, indicating that a clean cycle is pending.

At the end of the cooling season, ClearVue^TM detects the lack of new condensate and empties the tank almost completely, thus eliminating a significant source of algae growth and future startup problems.

ClearVue^TM even senses when water has remained stagnant in the tank for extended periods of time, and will run a complete tank drain to reduce buildup and slime growth in the tank. Additionally, a manual drain cycle can be run at any time by pressing the button on the tank.